ppp bundle-id
This command associates the current multilink interface with a virtual bundle id number.
You can configure an identical virtual bundle for the multilink WAN interface and the MLP over T1 serial WAN interface, where the identifier <bundle-id> is specified for both interfaces. In the example below, <bundle-id> is specified as ‘8’.
Syntax
ppp bundle-id <id>
|
Command |
Description |
|---|---|
|
<id> |
Defines the bundle-id (0-255). |
Default
By default, the bundle id is set to the multilink interface number.
Command Mode
Privileged User
Example
This example associates a multilink interface 1 with virtual bundle id 8:
(conf-if-multilink 1)# ppp bundle-id 8